9100 Single-Channel Signal Amplifier

  • high-voltage single-channel signal amplifier
  • output voltage up to 300 Vp-p (±150 V)
  • output current up to 150 mA
  • bandwidth from DC to over 500 kHz
  • fixed gain of ×15, optional ×10 or ×20
  • low distortion and floating or grounded signal ground
  • warranty: 3 years
Tabor Electronics
Other parameters
Price on request
Cat. no: 9100
availability on request

No item matches your selection.

Parameters and specifications

Tabor 9100 is a high-voltage power amplifier designed to amplify signals from arbitrary waveform, function and pulse generators. It increases signal amplitude to as much as 300 Vp-p while maintaining low distortion.

The amplifier is suitable for testing electronic components, piezoelectric transducers, actuators and other devices requiring high voltage. Its input and output connectors can be floated up to 250 V DC relative to ground, allowing adaptation to different test configurations.

number of channels 1
input connector BNC
input impedance 1 MΩ, DC coupled
input frequency range DC to 500 kHz
max. input voltage 50 Vp-p
output voltage 0 to 300 Vp-p (±150 V)
max. output current 150 mA
output impedance 0.1 Ω, DC coupled
gain ×15, optional ×10 or ×20
small-signal bandwidth 1 MHz at 20 Vp-p
large-signal bandwidth 500 kHz at 300 Vp-p
square-wave transition time < 1.5 μs
THD < 0.1% from 10 Hz to 10 kHz
power supply voltage 100 / 115 / 230 V AC
power supply frequency 47 to 63 Hz
power consumption 60 W
dimensions without feet 315 × 88 × 395 mm
weight 6 kg
operating temperature 0 to +50 °C
calibration 1 year

Downloads and links

Need some advice?

Call us on +420 325 610 123 and ask for a specialist in this field.