ER8000 FFT EMI Receiver 9 kHz - 3 GHz

    • extremely compact, flexible, user-friendly EMI receiver
    • ER8000 Opt.00: frequency range 9 kHz to 30 MHz
    • ER8000 Opt.01: frequency range 9 kHz to 3 GHz
    • fully compliant with CISPR 16-1-1, MIL-STD-461, ANSI C63.2 and FCC
    • CISPR 14-1 compliant in conjunction with CA0010
    • conducted and radiated emissions testing
    • direct analog-to-digital conversion up to 30 MHz
    • combination EMI receiver and spectrum analyzer
    • works with gapless FFT
    • extremely fast and accurate
    • built-in impedance stabilization network (LISN)
    • user port for control of external LISNs and auxiliary devices
    • free PES PMM Emission Suite software
    • rugged, compact design
    • 140 dBµV (2 W) maximum input level without damage
    • warranty: 2 years
    Narda Safety Test Solutions
    Other parameters
    Price on request
    Cat. no: ER8000.w
    availability on request

    No item matches your selection.

    Parameters and specifications

    frequency range

    9 kHz to 30 MHz (Opt.00)
    9 kHz to 3 GHz (Opt.01)

    resolution

    1 Hz; 100 Hz above 30 MHz

    frequency accuracy

    < 2.5 ppm

    spectral method analysis

    FFT, magnitude up to 8192, minimum overlap 89 %

    RF input

    Zin 50 Ω, N fem.

    VSWR 10 dB RF attenuator
    0 dB RF attenuator

    < 1.2; < 2 over 1 GHz
    < 2

    attenuator

    0 dB to 45 dB (5 dB step)

    preamp gain

    20 dB; 10 dB above 30 MHz low saturation preamplifier
    pulse limiter built-in (optional) below 30 MHz
    • the ER8000 is an extremely compact, flexible and easy-to-use high performance EMI receiver fully compliant with CISPR 16-1-1. Ideal for any conducted and radiated emission measurements from 9 kHz to 3 GHz.
    • FFT architecture to optimize measurement speed, it will measure in full compliance in as little as two seconds in the B-band and one minute in the C+D bands
    • the ER8000 is equipped with an internal 16 A LISN (Line Impedance Stabilization Network), enabling conducted emission measurement and EUT characterization tests to be performed quickly and efficiently, whether testing during product development or in a certified EMC laboratory. The optional DDA Click analyzer makes this measurement system more attractive and convenient than ever before.
    • the PMM Emission Suite software (supplied free of charge) is the ideal complement to this high-performance receiver, containing a complete set of user-friendly features for all EMI applications.

    Downloads and links

    Need some advice?

    Call us on +420 325 610 123 and ask for a specialist in this field.