Parameters and specifications
parameters |
Z, Rs, Y, Rp, θ, Ls, X, Lp, G, Cs, B, Cp, Q, D |
measurement modes |
LCR - measurement under constant conditions
Analyzer - measurements at variable frequencies and voltages
Continuous mode - continuous measurement using different sets of conditions
|
measuring ranges |
100 mΩ - 5 kΩ
|
measuring signal |
Power: -40 dBm to +1 dBm
Voltage: 4 mV to 502 mV rms Current: 0.09 mA to 10.04 mA rms |
measurement speeds |
FAST/MED/SLOW/SLOW2
|
max. speed |
0.5 ms (in FAST mode)
|
- measurement by RF I-V method (not by four-wire method using automatically balanced bridge, which is only suitable for measurement at lower frequencies)
- contact Check function to rule out incorrect contacting of the DUT
- comparison function
- storage of up to 30 sets of measurement condition settings for compensation in LCR mode and 16 sets in Analyzer mode
- SMD component measurement capability using Test Fixture IM9201
- interfaces: USB for PC connection, USB for flash drive, LAN, EXT I/O, optional GPIB and RS-232C
Downloads and links
Need some advice?
Call us on +420 325 610 123 and ask for a specialist in this field.