IM9202 Test Fixture

    • SMD test fixture with two-terminal connection to side electrodes
    • DC to 600 MHz
    • measurement of components of various shapes and sizes including RFID and NFC chips
    • warranty: 3 years
    Hioki
    Other parameters
    €4,408.00
    €5,333.68 incl. VAT
    Cat. no: IM9202
    in the supplier's stock

    No item matches your selection.

    Parameters and specifications

    maximum voltage

    ±42 V peak (AC + DC)
    measurable sample sizes axial components: pin spacing (length of the component body) from 1 mm to 25 mm; pin length from 2 mm to 10 mm; pin diameter from 0.5 mm to 2 mm
    radial components: pin spacing from 2 mm to 26 mm; pin length 2 mm or longer; pin diameter from 0,5 mm to 2 mm.
    SMD components: component length from 1.6 mm to 23 mm; component width 0.8 mm or more

    The IM9202 test fixture is designed for two-terminal impedance measurements of axial and radial leaded components as well as surface-mount components (SMD). It supports measurements up to 600 MHz and is used in combination with HIOKI impedance analyzers, including IM7587, IM7585, IM7583 and IM7581. 

    Axial leaded components with lead spacing from 1 mm to 25 mm and radial leaded components with lead spacing from 2 mm to 26 mm can be measured, as defined by the fixture geometry. Supported SMD component sizes are EIA0603 (Electronic Industries Alliance) and larger. 

    For stable operation, the IM9202 is mounted on the IM9200 stand, which provides a secure base and defined mechanical alignment between the test head and the fixture and supports handling of small components. Electrical connection to the analyzer test head is performed via the 7 mm interface of the test fixture. The IM9906 adapter is required to connect the 7 mm interface of the test fixture to the analyzer test head’s 3.5 mm connector. 

    The IM9202 is supplied with a carrying case designed for storage and transport of the test fixture and its included accessories. The carrying case also provides dedicated space for optional accessories such as the IM9906 adapter and IM9905 calibration standards, allowing related components to be stored together when required.

    Downloads and links

    Need some advice?

    Call us on +420 325 610 123 and ask for a specialist in this field.