RSA603 & RSA607 Real Time Spectrum Analyzers

    • USB spectrum analyser
    • 9 kHz to 3 GHz or 9 kHz to 7.5 GHz
    • 40 MHz real-time bandwidth
    • basic version of SignalVu software included
    • warranty: 3 years
    Tektronix
    Other parameters

    Choose: Variant.

    Variant
    RSA603A
    availability on request
    RSA607A
    availability on request
    detail
    €11,600.00
    €14,036.00 incl. VAT
    Cat. no: RSA603A
    availability on request
    detail
    €19,400.00
    €23,474.00 incl. VAT
    Cat. no: RSA607A
    availability on request
    more variants
    od €11,600.00
    od €14,036.00 incl. VAT

    No item matches your selection.

    Parameters and specifications

    frequency range
    RSA 603A 9 kHz to 3 GHz
    RSA 607A 9 kHz to 7.5 GHz
    frequency marker readout accuracy

    ±(RE × MF + 0.001 × Span) Hz

    RE: Reference Frequency Error

    MF: Marker Frequency [Hz]
    reference frequency accuracy
    initial accuracy at Cal (30 min warm-up) ±1 x 10-6
    first year aging, typical ±1 x 10-6 (1 year)
    cumulative error (Initial accuracy + temperature + aging), typical 3 x 10-6 (1 year)
    temperature drift ±0.9 x 10-6 (-10 to 60 °C)
    external reference input BNC connector, 50 Ω nominal
    external reference input frequency

    every 1 MHz from 1 to 20 MHz plus the following: 1.2288 MHz, 2.048 MHz, 2.4576 MHz, 4.8 MHz, 4.9152 MHz, 9.8304 MHz, 13 MHz, and 19.6608 MHz.

    the spurious level on the input signal must be less than -80 dBc within 100 kHz offset to avoid on-screen spurious.
    external reference input range ± 5 ppm
    external reference input level -10 to +10 dBm
    GNSS
    accuracy, when locked to GNSS1 ±0.025 ppm2
    GNSS Trained Accuracy, when GNSS antenna is disconnected3, 4

    ±0.025 ppm5

    ±0.08 ppm6
    RF input
    RF Input Impedance 50 Ω
    RF VSWR (RF Attn = 20 dB), typical

    < 1.2 (10 MHz to 3 GHz)

    < 1.5 (>3 GHz to 7.5 GHz)
    RF VSWR preamp ON, typical

    < 1.5 (10 MHz to 6 GHz, RF ATT=10 dB, preamp on)

    < 1.7 (> 6 GHz to 7.5 GHz, RF ATT=10 dB, preamp on)
    maximum RF input level
    maximum DC voltage ±40 V (RF input)
    maximum safe input power

    +33 dBm (RF input, 10 MHz to 7.5 GHz, RF Attn ≥ 20 dB)

    +13 dBm (RF input, 9 kHz to 10 MHz)

    +20 dBm (RF input, RF Attn < 20 dB)
    maximum safe input power (Preamp On)

    +33 dBm (RF input, 10 MHz to 7.5 GHz, RF Attn ≥ 20 dB)

    +13 dBm (RF input, 9 kHz to 10 MHz)
    maximum measurable input power

    +30 dBm (RF input, ≥10 MHz to Fmax, RF ATT Auto)

    +20 dBm (RF input, <10 MHz, RF ATT Auto)
    input RF attenuator 0 dB to 51 dB (1 dB step)
    amplitude and RF flatness
    reference level setting range -170 dBm to +40 dBm, 0.1 dB step, (Standard RF input)

    1Testedusing GPS system.

    2Foruse to a stability of ±0.025ppm, the unit should be powered on continuously for 2 to 5 days after initial unpacking.

    3Testedusing GPS system.

    4For24 hours continuous operation within temperature limits (see footnotes 5 and 6) after GNSS training. Refer to cumulative error specification if operating in GNSS trained mode beyond 24 hours since last training.

    5Forless than 3 °C ambient temperature change after training.

    6Forless than 10 °C ambient temperature change after training.

    Downloads and links

    Need some advice?

    Call us on +420 325 610 123 and ask for a specialist in this field.